Deep, mains interlocked catch tray with anti blow out folds – Large capacity for caught insects

High efficacy Synergetic UV tubes – Patented technology with dual wavelength output for an increased catch

Tool free, swing down front guard – For simple and quick servicing, with full access to consumable parts

Three way mounting for flexible installation – Simple wall, ceiling or desk mounting with no extra parts

Independent certification – Independently tested and certified to RoHS and all relevant European Standards

Market leading design – Contemporary British design

• Catches common House flies, Blow flies and Fruit flies 30% faster than traditional UVA lamps (which appears blue to the human eye)
• Attracts a broader range of insects, including stored product moths, where lamps with only UVA light are less effective
• Keeps on working longer because the green light phosphor hardly ever degrades, unlike UVA lamps which lose up to 40% of their power after 6 months.

1. Firstly the height at which Allure Fly Zapper units are to be installed is important in terms of efficiency. As a general rule the higher up they are the less effective. In a working environment the ideal height would be between two and two and a half metres from the ground. At this height the risk of the Allure Fly Zapper units being damaged by moving trolleys or forklift trucks is reduced whilst maintaining maximum efficiency. They will also be easier to clean and maintain.
2. The ideal location is at right angles to the major light source in the room.
3. Allure Fly Zapper units must not be sited so that the light source is obscured (if flying insects cannot see it the unit will not be very effective).
4. Site between potential entry points and production areas to intercept pests before they reach sensitive areas.
5. Do not rely on area of coverage of a particular Allure Fly Zapper unit as the only criteria for choosing and installing fly zappers. There are several factors that need to be considered before deciding on the appropriate number and size of units to be installed. These would include the number of entry points including doors, windows and any other openings for instance for pipe work or extractor fans. What is the volume of human traffic through the area to be protected? What would be the normal flying insect population? What is being produced? And where is the facility located? If it is close by a lake or a rubbish tip then there will be a greater risk than if the facility is in the middle of an industrial estate.
6. Allure Fly Zapper should not be installed in areas where they can be affected by air currents. Avoid areas close to air conditioning vents or where draughts may be a problem. This is because flying insects on the whole do not like moving air and Allure Fly Zapper units placed in these areas may be less efficient.
7. Allure Fly Zapper units are often placed directly in front of doorways – the logic of the installer being that this is where the insects enter and so they will be more easily caught. In fact this will only encourage insects to enter and make the problem worse. It is better to install Allure Fly Zapper units off to the side of doorways ensuring as much as possible that the light does not shine out of the open door.
8. Never ever install Allure Fly Zapper units of any description directly above a processing line or food preparation area. The Ultra Violet lamps are highly attractive to flying insects and will attract the insects to those areas. Better to install the Allure Fly Zapper units away from sensitive areas to attract the insects and kill them away from the critical areas to be protected.
9. Don’t forget to change the lamps every 12 months – preferably just before the start of the fly season.